-
About Us
-
-
-
-
Request a Prototype
Safety screen quality supervision is good, to understand the six key points
Release Time:
2022-11-21 10:34
Source:
www.dgdadi.com
Safety screen quality control is a problem for every manufacturer, quality control is a problem, which is the competitiveness of a manufacturer. Today we have summarized the six key issues of quality control.
1, do not define the technology, clear technology do not change
Safety light screen quality problems, to find out the source of the problem, the main factor or the main performance;
Changing technology without understanding the problem hides the real cause and problem.
2, process control should have a strong concept of quantification and traceability
Safety screen quality depends on a lot of factors, do not neglect any details;
Try to use data to control and record any details;
Failure to control and trace the details of the process will mislead the formulation of corrective and preventive methods.
3. You have to be patient to deal with problems
Can not impetuous, hope to eat a fat;
Don't ignore unusual situations because they have nothing to do with the problem;
Can not find the cause and rules of the moment do not not take action, can put the influence of the research to control the standard;
The previous verification and induction of some experience and rules review review;
As long as the discovery of a few lessons and rules, then go further to raise it into a theory, even if the cost is worth a little more;
To be clear about "a thousand miles of dike destroyed by the ant", we should also be clear about "the foolish old man moved the mountain".
4. Build a preventive mindset
Safety screen quality management is the highest level of prevention, rather than how to recover after the problem;
Any quality problems must be preceded by precursor, it depends on whether you have the way, method and experience to control and distinguish;
High attention should be paid to the repetition of the same quality problem for the second time;
The process and effect data of each day should be integrated with tools, and rules and trends should be found and changed from the integrated effects. These rules and trends should be revised continuously.
Before the safety light screen, each control element should be as consistent as possible.
5, quality control must have management thinking
Do not want to rely directly on the staff to achieve the stability of safety curtain quality;
Safety screen quality is created, not the direct manufacturer management, quality can never be stable;
Therefore, it is necessary to observe, care about and study the performance and situation of the direct manufacturer of safety curtain, and implement management and adjustment according to these performance and situation;
If the safety curtain directly manufacturer performance and situation is not controlled, as long as there is a quality problem you will never study the correct cause;
Do not think that the process control requirements of the rules in our technology are suitable, and the quality of the safety light curtain is no problem;
So our process control requirements need to be constantly improved, but also need to manage people.
6. Listen to ideas and suggestions
Don't think that opinions are worthless because others don't understand the reality and can't deal with problems at once.
But they, especially direct safety curtain makers, can give us a lot of tips and reminders;
If you can deal with this problem, no one's opinions and suggestions can be listened to; But when you can't handle the moment, anyone's ideas and proposals should be listened to, should be tried and tested, whether you like or not;
Safety screen quality management thinking often involves the forefront of science and technology, even a casual word or a complaint, may guide or hint at a major technological innovation direction, so professional and technical personnel should pay attention to details and good at capturing details.